Preface

·Thank you very much for purchasing the latest JRL 1600 digital pneumatic circular CNC dispenser.

·This is a new type of high-precision circular CNC dispensing machine recently launched by the company, which is specially used for dispensing circular products.

·Before use, please read this operating instruction carefully.

·The accessory configuration list of this digital air pressure circular dispenser is in the following appendix. Before using this product, please carefully check and confirm whether the accessories are complete. If you have any questions, please contact us or the sales agent in time.

summary

Characteristic JRL 1600

1 Two modes (run mode/test mode).

2 Intelligent detection and alarm function to ensure normal dispensing operation and effectively prevent equipment damage.

3 LCD display, easy to read dispensing parameters, with counting function.

4 Adopt one stepping motor (rotation) and one cylinder to control the up and down movement of the rubber head.

5 The direction of rotation of the motor can be set arbitrarily.

6 You can arbitrarily set the upward/downward speed of the needle cylinder, and the motor rotation speed/acceleration.

7 Vacuum suction adjustment mechanism device to prevent dripping.

8 There is a test mode, you can set the start angle and end angle of the glue, so that the machine's glue application work becomes more accurate and convenient.

9 The pre-delay time and post-delay time of dispensing can be set at will to prevent the phenomenon of "big head" and wire drawing in dispensing operation.

10 It has a starting point correction function, and different methods of returning to the starting point can be set after processing, which is convenient for processing round products with gaps.

11 Precision dispensing controller, no external dispensing controller is required.

12 Double-rod cylinders make the machine fast and stable during operation, eliminating mechanical movement errors.

13 X-Y-Z screw adjustment rods make the machine positioning precise and fast machine adjustment mechanism setting.

The machine is simple and convenient, and the interface is friendly

·The controller adopts LCD liquid crystal display, various parameters are displayed comprehensively and concisely, and the man-machine interface is particularly friendly.

The machine dispensing parameter setting is simple and convenient.

·LCD liquid crystal display sets the start dispensing angle, the end dispensing angle and the number of dispensing circles, the forward and reverse rotation of the motor, the running speed and acceleration of the motor, and the mechanical repeatability is accurate to ±0.01mm.

Easy to maintain

·Use a variety of commonly used external accessories, easy to maintain and use.